Long Lasting SPF Day Wear (SPF 20) combines different encapsulated UV filters to ensure full protection and guarantee a perfect matte finish. The encapsulated pigments diffuse on the skin upon application to match perfectly with a person’s natural skin tone and leave a uniform and smooth complexion. Applied to clean skin, this formula guarantees a red-carpet look that lasts all day, no matter the camera flashes.
SunCaps™️, AvoCap™️, OctoCap™️, and OctiCap™️ ensure a full UV SPF 20 protection. CameleonCap™️ Red, Yellow, and Black allow a perfect match to natural skin tone.
|Phase||Trade Name||INCI Name||% w/w|
|A||POE (100) Hydrogenated Castor Oil||2.80|
|Cyclopentasiloxane (and) Trimethylsiloxysilicate||5.90|
|Dimethicone (and) PEG/PPG-18/18 Dimethicone||8.00|
|Cyclopentasiloxane (and) Polysilicone-11 (and) Glyceryl Laurate (and) Cetyl PEG/PPG-10/1 Dimethicone (and) PEG/PPG-18/18 Dimethicone||8.00|
|Cyclopentasiloxane (and) PEG/PPG-18/18 Dimethicone||6.60|
|Cyclohexasiloxane (and) Cyclopentasiloxane||9.40|
|Henoxyethanol (and) Caprylyl Glycol||1.00|
|B||AvoCap™️||Butyl Methoxydibenzoylmethane (and) Octocrylene (and) Cellulose Acetate||5.30|
|OctiCap™️||Ethylhexyl Salicylate (and) Cellulose Acetate||14.00|
|OctoCap™️||Octocrylene (and) Cellulose Acetate||12.90|
|D||Cameleon™️ Yellow||Iron Oxide (CI 77492), Titanium Dioxide, Acrylate/ Ammonium Methacrylate Copolymer, Cellulose Acetate, Magnesium Stearate, Propylene Glycol Stearate||1.30|
|Cameleon™️ Black||Iron Oxide (CI 77499), Titanium Dioxide, Acrylate/ Ammonium Methacrylate Copolymer, Cellulose Acetate, Magnesium Stearate, Propylene Glycol Stearate||0.20|
|Cameleon™️ Red||Iron Oxide (CI 77491), Titanium Dioxide, Acrylate/ Ammonium Methacrylate Copolymer, Cellulose Acetate, Magnesium Stearate, Propylene Glycol Stearate||0.40|
Procedure for Long Lasting SPF Day Wear
Mix Phase A for 5 minutes at 300 rpm at 80°C. Add Phase B gradually under mixing 400 rpm/80°C. Mix for another 2 minutes at 400 rpm/80°C. Homogenize the mixture for 3 minutes/80°C/13k rpm. Mix Phase C for 15 minutes at 300 rpm at 90°C. Add Phase C very gradually to AB under homogenization 15.6k rpm/80°C. Homogenize the mixture for 2 minutes/80°C/16k rpm. Continue mixing at 200 rpm (without heating) until the temperature of the base is between 25-30°C. Add Phase D gradually to the mixture of ABC under mixing 200 rpm for 10 minutes with a paddle.
Appearance: light grey cream turning to brown upon application