A refreshing cream-gel that replenishes skin with soothing hydration. This lightweight formula gives an instant boost of any time, anywhere moisture thanks to the combination of Olivem® 1000 and Olivem® VS Feel. Immediately cools and refreshes skin, leaving it feeling softer, smoother. For all skin types.
Sequence | Trade Name | INCI Name | % |
A | Water (Aqua) (deionized) | Up to 100 | |
Carbomer | 0.30 | ||
Glycerin | 2.00 | ||
Tetrasodium EDTA (38% active) | 0.10 | ||
B | OLIVEM® 1000 | Cetearyl Olivate, Sorbitan Olivate | 2.00 |
C | OLIVEM® VS FEEL | Cetearyl Alcohol, Cetyl Palmitate, Sorbitan Palmitate, Sorbitan Oleate | 3.00 |
Caprylic/Capric Triglyceride | 7.50 | ||
BHT | 0.10 | ||
D | Preservative | a.n. | |
E | Sodium Hydroxide (30% Aqueous) | a.n. |
Formula No. CPD093-12-22A
Procedure:
1. Prepare phase A and disperse the thickener using a suitable dispersion unit (e.g. Silverson, Ultra
Turrax, etc.) warm it up to 75-80°C
2. Add the Olivem®1000 Crystal SkinTM flakes (phase B) directly into the hot water, under magnetic
stirring
3. Stir for 1 minute and then homogenize for 1 minute using a suitable dispersion unit (e.g. Silverson,
Ultra Turrax, etc.)
4. Add phase C to phase A+B at 70-75°C homogenizing using a suitable dispersion unit (e.g. Silverson,
Ultra Turrax, etc.)
5. Cool down to 40°C using a water bath while stirring
6. Add phase D
7. Adjust pH with phase C homogenizing using a suitable dispersion unit (e.g. Silverson, Ultra Turrax,
etc.)
Leave A Comment
You must be logged in to post a comment.