Exquisite Gems’ sulfate-free shampoo shows off an all-natural colorant to give a luxurious appearance to this sophisticated formulation. The combination of mild surfactants offers high foaming and gentle cleansing.
Phase | Trade Name | INCI Name | % |
A | Disodium Lauryl Sulfosuccinate (40%) | 20.70 | |
Plantaren® 2000 N UP | Decyl Glucoside | 20.00 | |
Citric Acid (50% Solution) | qs | ||
B | Cutina® AGS | Glycol Distearate | 1.60 |
Lamesoft® PO 65 | Coco-Glucoside (and) Glyceryl Oleate | 3.50 | |
Water | 23.70 | ||
EDETA® BD | Disodium EDTA | 0.10 | |
C | Rheocare® TTA | Acrylates Copolymer | 6.50 |
Dehyton® MC | Sodium Cocoamphoacetate | 4.40 | |
Plantapon® LGC SORB | Sodium Lauryl Glucose Carboxylate (and) Lauryl Glucoside | 4.90 | |
Jordapon® ACI 30 G | Ammonium Cocoyl Isethionate | 10.70 | |
Salcare® Super 7 | Polyquaternium-7 | 1.00 | |
Amodimethicone | 0.50 | ||
Preservative | qs | ||
Fragrance | 0.50 | ||
Gemtone® Tan Opal G005 | Mica (and) Iron Oxides (and) Titanium Dioxide | 0.50 | |
Tinogard® Q | Tris(Tetramethylhydroxypiperidinol) Citrate | 0.05 | |
Arlypon® TT | PEG/PPG-120/10 Trimethylolpropane Trioleate (and) Laureth-2 | 1.35 | |
Citric Acid (50% Solution) | qs |
Formula No. CLG.NA-H-110027
PROCEDURE:
- Heat the Sulfosuccinate and Plantaren® 2000 N UP to 65 – 70 C and mix gently until liquified and homogeneous. Adjust the pH with citric acid to about 7 while mixing.
- At 70 C, add the Cutina® AGS and Lamesoft® PO 65 and mix until uniform.
- Add water to begin cooling the formula. Add the EDETA® BD and mix for 15 minutes to dissolve.
- Add the Rheocare® TTA at 35 C and mix for about 15-20 minutes. Add additional ingredients in the order shown above, being sure each ingredient is completely uniform in the formula before adding the next. Adjust the pH with citric acid at the end, if necessary, to about 5.8.
Leave A Comment
You must be logged in to post a comment.